| |
Digi-WAVE Tour Guide Systemfor Factories, Museums, Tourist Attractions, Bus Tours and Educational Institutions.The Digi-WAVE Tour Guide System can play a key role in enhancing communication between tour guides and tour group members. It helps overcome background noise and distance from the tour guide - even in noisy surroundings. The system can be used in factories, museums, tourist attractions, bus tours anywhere hearing assistance is required for tour-type presentations. The Digi-WAVE Tour Guide System saves the tour guide’s voice, enhances the experience of the tour group members, and ensures that the presentation doesn't disturb those outside the tour group. |
   |
TGS10C One-Way Tour Guide System Includes one (1) DLT-100 Transceiver with charger and choice of microphone, ten (10) DLR-50 Receivers with choice of Head/Earphones, and twenty (20) BAT 010 batteries. By adding one more DLT-100 transceiver, this transceiver can be configured for a second tour guide or used as a pass-around microphone among tour group members. For an additional DLT100 transceiver or additional DLR-50 receivers (no limit) and accessories, click here.
|
Free ground shipping Continental US |
Volume and/or Government/Educational Discount may apply |
|
|
Digi-WAVE for tour guide applications. The portable DLT 100 Transceiver (right) is capable of transmitting and receiving digital modulated signals up to
100 ft outdoors and up to 200 ft indoors to other DLT 100 transceivers or DLR 50 receivers. Operating on the 2.4GHz ISM band
the DLT 100 has a high resistance to RF interference and can be used in most countries around the world. It can operate on four channels simultaneously in two-way mode and fifteen channels simultaneously in one-way mode. Patented frequency-hopping software greatly reduces interference potential. An LCD displays current set-up, battery life, time and RF strength. All controls are on the front panel and also provide access to change set-up. The DLT-100 transceiver is equipped with a built-in microphone and speaker The portable DLR 50 Receiver (left) is capable of receiving digital signals up to 100 ft outdoors and up to 200 ft indoors with DLT 100’s. It can operate up to fifteen channels simultaneously when used in one way application. An LCD displays channel of operation, volume setting and low battery status. All controls are on the front panel and also provide access to change set-up. The DLR 50 is equipped with a 3.5mm mono jack that can accommodate a variety of listening options such as headphones, earbuds or neckloops. The DLR-50 receiver has a battery life up to 24 hours with two AAA Alkaline batteries. Power will automatically shut off after approximately one minute when not operating with other compatible devices. The CHG 1012 Drop-in Charger will conveniently store and charge
The Digi-WAVE digital system proves beneficial in tour guide situations:
|
|
Volume and/or Government/Educational Discount may apply |
|
|
The two major components are the portable DLT-100 transceiver for 1-way or 2-way operation and the DLR-50 receiver for 1-way listening applications. Up to four groups can simultaneously use the system in 2-way operation mode.
. Two 3.5 mm mono jacks can accommodate external headset microphones such as MIC 100, MIC044 2P single muff or MIC 079 dual muff headset microphone. Other listening options include headphones, earbuds or neckloop. It has built-in rechargeable batteries with 14 hours of use after a 4 hour charge. Each DLT includes a charger but it can also be charged in the optional CHG 102 two-bay charger or with any iPod/iPhone USB charging cable. 
up to 12 Digi-Wave DLT 100 transceivers over the course of a five-hour time span. The battery status and charge indication are provided on the DLT 100's LED display.
The charger is powered by an external universal power supply for 90-240 VAC input.
It is ideal for multiple-transceiver applications where flexibility is key -- including tours, conferences and event production. 
